It is designed with super double- capacitor and high power air-cooling motor.
More safer operation and more strong power output provided.
It has multiple functions such as carpet and floor cleaning, wax removing, low-speed polishing, floor crystal treatment and renewing.
|Brush rotation speed||154rpm/min|
|Base plate diameter||17”|
|Main cable length||12m|
|Weight of the main body||33kg|
|Weighting iron weight||1X14.5kg|
|Handle packing size||400X120X1140mm|
|Main body packing size||535X430X375mm|
|Accessories||Main body, handle, water tank, pad holder, hard brush, soft brush, weighting irons, driving disk|
Integrating the functions of floor polish cleaner, it can be used for crystallizing or renewing of the stone, suitable for plant, building, hotel and shopping plaza. It is particularly suitable for the cleaning company to make daily care and special treatment to the stone.
Set up a notice board at the work site. In order to prevent mud and dirt from splashing to the wall, use a plastic film to affix the bottom of the wall around the ground. Add clean water to the tank of machine, connect the power, prepare various types of cutting discs, polishing pads, buffer pads etc., and adjust the renewing machine and ground level to prepare for the cleaning work. If there has old wax on the floor, please removing wax first.
When the machine operating, swing the head left and right.
Use grinding discs to grind the floor smooth. Grinding about one square meter each time, repeatedly pushing and pulling with suitable water.
Suck the water out use vacuum cleaner, make it dry.
Use 50#, 200#, 400#, 800#, 1500#, 3000# polishing pads polishing the floor.
Use buffer pads with chemical to polish the surface, make it shine.